My new window

In some posts I have already written that my apartment is under the roof. Like a penthouse hihi

I’ve only had sloping windows so far.
At the end of June, my landlord told me I was getting a dormer.
Brilliant, great idea 🙂

Which I didn’t know, however, how long it would take. I expected a week or so, instead it was 10 weeks !!!!
First they cut a huge hole in my roof, over 3 x 2 yards.
Then nothing!

I asked my landlord when the new window would be installed. He said that the hole should first be measured and then the window ordered. And then I would have to wait 6 – 8 weeks until the new window comes.

It took exactly 8 weeks until the new window was delivered and the work could continue.

Over 8 weeks where temperatures were over 86 degrees every day,

Over 8 weeks where I could not air down in the apartment because the hole was completely covered,

Over 8 weeks where I could not use the room because I had made room for the craftsmen.

The worst thing I could not sew since the end of June. Unfortunately, this was the same time my sewing class was on a summer break. Last Saturday the course started again!!!! Finally.

Yesterday I started to put my furniture back in its place. It’ll take me a few more days to finish completely, but at least the new window is ready.

The result was worth all this, but how often I have cursed the last few weeks I can’t count.

Now I have scolded so much, now I want to show what it looks like before and after.

Unfortunately I had taken the before photo at night so that one cannot compare it correctly and I put a foil over my window seat.

New window before

Here is the new window. Doesn’t it look great? The room is now much brighter and my homemade window seat looks great under the window. Like it was meant to be

New window after

Tomorrow I’m going to the sea for a few days to relax. I hope I can bring some nice photos.

DIY Your own window seat (Tutorial)

I live in a small apartment with a sloping roof. This means that almost all walls are slanted at the top.
Unfortunately, this also means that you can hardly buy any finished furniture. That’s why I taught myself to build my furniture to match my apartment.
Today I describe how I built myself a bench under the window…

First you have to measure the place very accurately. And I mean VERY EXACTLY!!!
I used a laser measuring tool for this.

For the height, I calculated about 15 – 16 inch including the seat cushion.

Then you buy the wood panels you need. For the sides, the back and the bottom I used laminated panels. For the top and the front I used spruce or fir. I don’t remember because I made the window seat months ago and I’m just posting now. I bought the wood panels in a shop that had sawn the wooden panels according to my wishes.

_MG_9749

I started with the wooden front.

I wanted the front to look like it was made of three pieces. That’s why I sawed 2 lines into each front piece with my saw.

IMG_1131

IMG_1136

IMG_1134

I wanted the window seat to turn white, but no bright white. And I wanted to use chalk paint because it looks so matt. On the Internet I found a retailer in the Netherlands who had sold chalk paint white as “historical white”.
I had a little sample sent to see if I liked the color. The color was perfect for me.

_MG_9865

IMG_1148

Sand between each coat after the paint has dried.

_MG_9844

Also paint the lid with the chalk paint. I painted the front and lid 3 times so that the white completely covers the wood colour.

Finally, you have to seal the paint.

The next step is to dowel the sides and the bottom together. I started with the front, then the two sides and finally the back part.

Here you can see what mistake I made in the first part: First I doweled the front part, removed the dowels and then painted the front. What do you want me to say? After drying the paint the dowels didn’t fit anymore and I had to make a new front part.
So first paint the wood and then dowel it!!!!

_MG_9681

_MG_9847

When the glue dried, I strengthened the inside of the seat with metal angles.

_MG_9873

I have glued the edges of the laminated wooden boards with edgings.

_MG_9864

In the hardware store I found protection for the wooden floor that I glued under the seat. I can’t remember what it’s called.

_MG_9767

I attached the lid with piano hinge.

_MG_9745

I found the seat and back cushions at Ikea 2 years ago. They are designed for outdoors but they fit perfectly and are very comfortable. Under the pillow I put this one on the wood to prevent the pillows from slipping. It’s for carpets, but who cares

_MG_9814

Here the first window seat. I needed a total of three of them.  I also use them as storage for my tools and handicrafts.

IMG_1820

My window seat for Christmas. In the next post I will write a tutorial how I sewed these pillows 🙂

Pillow Giftl 19

Spring and Easter. Yes I know. Too many pillows. Next year I won’t use all of them

Pillow Giftl 21

and today 🙂 I love these pillows. I didn’t make the design, but I liked it so much that I copied it.

Pillow Giftl 22

Pillow Giftl 23